Kuppersbusch ITE127-9 Mode D'emploi page 25

ca. 50 mm
ca. 50 mm
9. Push the part (Hc) on the part (Ha).
Hc
10. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
8 mm
Hb
90°
21 mm
90°
21 mm
Ha
Ha
11. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
8 mm
12. Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and the
appliance door by adjusting the part
Hb.
Hb
13. Press the part (Hd) on the part (Hb).
K
Ha
25