Kuppersbusch ITE127-9 Mode D'emploi page 24

24
Open the door. Put the lower hinge
cover in position.
4mm
44mm
4. Attach the appliance to the niche with 4
screws.
5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
I
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Attach the hinge covers (E) to the
hinge.
C
D
E
7. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Ha
Hc
8. Install the part (Ha) on the inner side of
the kitchen furniture.
E
Hb
Hd