Environmental Protection; Declaration Of Conformity - F.F. Group BLi 40V/5.0Ah Notice Originale

8 | English
Protect the battery against
temperatures above 45
Li-ion battery must be recy-
cled or disposed of properly
MAINTENANCE
If you need to repair or replace the battery
or charger, contact to an authorized af-
ter-sales service agent.
CHARGER
ƒ Keep the charger clean and clear of de-
bris. Do not allow foreign material to get
into the recessed cavity or onto the con-
tacts. Wipe the charger clean with a dry
cloth. Do not use solvents or water, and
do not place the charger in wet conditions.
ƒ Unplug the charger when there is no bat-
tery in it.
ƒ Store the charger at normal room tem-
perature. Do not store it in excessive heat.
Do not use the charger in direct sunlight
or in damp conditions. Do not charge
outside. Recharge at room temperature.
If the battery is hot, allow it to cool down
before recharging.
BATTERY
ƒ Make sure the battery is fully charged be-
fore storage in order to maximize the life
of the battery.
WARNING: Shorting the battery
terminals together may cause
burns or a fire.
ƒ When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
ƒ Do not store the battery pack on the tool.
ƒ After charging, the battery pack may
be stored in the charger, as long as the
charger is not plugged in.

ENVIRONMENTAL PROTECTION

C
o
GUARANTEE
This product is warranted in accordance with
the legal/country specific regulations, effec-
tive from the date of purchase by the first
user. Damage attributable to normal wear
and tear, overload or improper handling will
be excluded from the guarantee. In case of a
claim, please send the machine, completely
assembled, to your dealer or the service Cen-
tre for electric power tools.

DECLARATION OF CONFORMITY

ƒ We declare under our sole responsibility
that this product* is in conformity with
the following standards or standardized
documents:
*42408: EN62133
*42409: EN60335-1, EN60335-2-29,
EN62233 in accordance with the provi-
sions of the directives 2014/35/EU.
ƒ Technical file at:
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos-Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos-Greece. 3/12/2018
BLi 40V/5.0Ah | CH 40V/2A
Recycle raw materials instead of
disposing as waste. Machine, ac-
cessories and packaging should
be sorted for environment -
friendly recycling. The plastic
components are labeled for cat-
egorized recycling.