0 684 400 703
...4.
Operation
4.
Voltmeter
Direct-current voltages of between 8 Volt and
16 Volt can be measured between the battery
terminals in the
The following information is displayed by the
battery tester (example)
VoLTMETEr
VoLTAgE:
4.3
Configuration
The following menu items are available on
the
Configuration
CoNFigurATioN
CoNTrAST
LANguAgE
DEALEr ADDrESS
SErViCE
ACiD DENSiTy
DATE
4.3.1 Contrast
The contrast setting for the LCD display can
be adjusted in the menu item
contrast is darkened by the
tened by the key . The changed contrast is
saved by pressing the
4.3. Language
Language
In the
are available for selection. Only 6 languages
appear on screen at first. You can select
further languages by pressing the or
Entering the language and acknowledging by
Enter key
pressing the
switch over to the language that has been
Back Key
selected. The
main menu.
Robert Bosch GmbH
Voltmeter
operating mode.
12,72V
operating mode:
Contrast.
and brigh-
key
E.
Enter key
menu, several languages
keys.
E will immediately
O returns you to the
4.3.3 Dealer Address
You can enter your address in the menu item
Dealer Address.
printed out with the test results. 6 lines are
available for your Dealer Address. Up to 21
characters can be entered in each line.
You can jump from entry point to entry point
using the
characters from the character set provided.
When you have finished your entries, the
menu item is closed by pressing the
key
4.3.4 Service
Additional applications are available in the
menu item
Software / hardware status:
The software status and the hardware status
of the battery tester are displayed.
Calibrating:
You can calibrate battery tester. This appli-
cation is only available for Bosch Customer
Service.
Software update:
The
Bosch Customer Service can execute a soft-
ware update over the serial interface.
Self-Check:
The possibility is given here to carry out an
LCD test, a key test an interface test (RS 232)
or a printer test.
Your address will then be
. Use the
Key
keys
E.
Service
:
1 689 979 868 (2005-10-07)
en 1
and to select
Enter