Technical Specifications - Arcam rPhono Guide De Démarrage Rapide

rPhono gain
30dB
Output
Connect the rPhono output to the appropriate line input of your preamplifier or integrated amplifier.
Do not connect the rPhono output to the dedicated PHONO input available on some integrated amplifiers,
unless the amplifier is capable of reducing its input gain to normal line level (as it is the case with the Arcam
A19, A29, A39 and A49 integrated amplifiers).

Technical Specifications

Frequency response
Total Harmonic Distortion + Noise
(at 1kHz, 5V Out)
System gain
Input impedance
Equivalent input noise
(A-weighted, 40dB MM gain)
Output level
Power requirements (max)
Dimensions (WxHxD)
Net weight
Supplied accessories
E&OE. All specification values are typical unless otherwise stated
40dB 50dB
Rumble filer OFF
Rumble filter ON
MC input, 30dB gain
MM input, 30dB gain
MC input
MM input
MC input
MM input
MC input
MM input
Nominal
Maximum
12V DC, 2.0A
194 x 44 x 124mm
1.1kg
Power supply with interchangeable plugs
Stereo phono–phono cable
DIP switch and pot trim tool
User manual and registration card
An MM input gain of 30, 40, 50 or
52dB can be selected to best match
your turntable and amplifier setup.
NOTE: The MC input has a fixed gain
of 30dB in addition to the values
selected above.
52dB
Setting the gain to an incorrect
value may result in a distorted
audio output
20Hz-50kHz ± 0.2dB
-3dB at 7Hz
45Hz-50kHz ± 0.2dB
-3dB at 20Hz, -13dB at 10Hz
0.005%
0.0015%
60, 70, 80 or 82dB
30, 40, 50 or 52dB
50 - 550Ω + 1nF
47kΩ + 120, 220, 340 or 440pF
0.06µV RMS
0.5µV RMS
0.5V RMS
6V RMS
E-7