Table des Matières
Publicité
Getting started
2
7. Connect the steam generator iron
GB
to the mains supply. Press the power
switch.
Operating instructions
2
1. Connect the steam generator iron
to the mains supply. Press the power
switch.
26/30
1
8. Turn the temperature dial clockwise
to its maximum setting. Then, the
temperature indicator light on the
iron will illuminate. It extinguishes
once the set temperature is reached.
The temperature indicator light cycles
on and off as the correct temperature
is maintained.
1
2. When the power switch is pressed,
the power lamp will light. Wait for one
to two minutes, until the steam lamp
lights.
9. When the steam lamp lights, press
and hold the steam button for about
one minute to get steam, then hold
one more minute in order to clean the
steam generating system.
Iron an old towel to ensure that
any residues inside the iron are
not transferred to the laundry. If
necessary, wipe the sole plate with a
slightly damp cloth.
3. To activate the steam, press the
steam button. When releasing the
button, use up the steam before
putting it back on the iron rest of the
steam station.
Publicité
Table des Matières
