How To Assemble - Domo DO8122 Mode D'emploi

DO8122
PARTS
C
A. Air outlet
B. Air inlet
C. Controle panel
D. Front base
B
E. Back base
A
controle panel
1. Off buton
2. Speed controle
3. Oscillation knob
4. Timer
3
E
D
4
1
2

HOW TO ASSEMBLE

Pass the power cord through the central gap of the back base (E).
Assemble the base, fitting the back base (E) to the front base (D).
Fix the fan onto the base and screw it on with the screws provided.
HOW TO USE
To adjust the speed, puch the required button (2)to select the desired speed :
1 : slow
2 : medium
3 : fast
To turn off the fan press the «off» button.
The oscillation of the tower ventilator is controlled by the switch(3).
Press the button to start the oscillation. Press the button again to stop the oscillation
The oscillation will only work when a speed is selected and when the timer knob is on
the «ON» position.
28