Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Insert the two mounting screws through the holes in the overhead cabinet and
into the holes in the top of the microwave oven. Turn each screw until it is
completely tightened.
a
5.
Holding the microwave oven flush against the back wall and the overhead
cabinet, tighten the two screws completely.
CONNECT DUCTWORK
1.
Extend the house exhaust duct down, and then connect the exhaust duct to a
range hood boot adapter (not supplied).
2.
Seal exhaust duct joints using furnace duct tape for high temperature
applications.
a
15
a
Adapter
A
Publicité
Chapitres
Table des Matières
