Flyer Upstreet6 Notice Originale page 215

FLYER rider
During your e-bike's first inspection by the FLYER
specialist retailer, ask them to explain the correct
processes for cleaning and oiling the chain after
rain and checking components for function or
damage .
Before each ride – FLYER rider
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Are all quick-release fasteners, quick-release
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam-
age as well as safe attachment and correct
fastening
• Check that the handlebars, stem, seat post
and seat are safely attached and correctly
positioned
• Check the battery's charge status
• Check that the battery is correctly and secure-
ly attached .
After each ride – FLYER rider
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
• Check the tyres for damage, wear, brittleness,
foreign objects and sufficient profile depth
• Check the rims for wear and
true running
• Check the tension of the spokes
• Clean the chain and sprockets as required
and lubricate them with a suitable chain oil
approved by the manufacturerIf necessary,
clean the brake discs with a
suitable brake cleaner approved by the
manufacturer
• Clean all bearings as required and lubricate
them with suitable lubricant approved by the
manufacturer
• Clean suspension elements as required and
lubricate them with original lubricant approved
by the suspension element manufacturer
• Clean all moving parts for which lubrication is
intended (especially quick-release fasteners,
quick-release axles and joints) as required
and lubricate them with a suitable lubricant ap-
proved by the manufacturer
Allow your FLYER specialist retailer to instruct
you .
What to do after riding in rain, snow or wet con-
ditions:
(in addition to the points under "After each ride")
FLYER rider
• Clean the chain and lubricate it with a suitable
lubricant approved by the manufacturer
• Clean the brake
• Clean the gear system
• Check that all components are sufficiently lu-
bricated
Allow your FLYER specialist retailer to instruct
you .
Monthly – FLYER rider
Check the firm attachment of all screws, nuts and
quick-release fasteners
Every year or after every 1000 km, whichever
occurs first
FLYER specialist retailer
• Lubrication of all moving parts for
which lubrication is intended
(excluding brake surfaces)
• Visual inspection of the frame and of
components for cracks and damage
• Mend paint damage
• Replace parts with rust spots
• Treat all bare metal parts (excluding brake
surfaces) against corrosion (rust)
• Change defective or damaged parts
• Check the wheels and centre them as
required
• Check the tension of the spokes
• Check and clean the
chain/sprocket/cogset
• Lubricate the chain with a suitable lubricant
• Check the rim for wear
• Check the brake pads for wear
• Check that all screws, nuts, quick-release
axles and quick-release fasteners are firmly
attached
• Check the brake system and quick-release
axles and adjust them or replace parts if nec-
essary
• Check the gear system and adjust or replace
parts of it if necessary
• Check the hubs
• Check the headset
• Check the pedals
Only use cleaning agents and lubricants
that are recommended or approved by
the component manufacturer .
Please note that not all lubricants and
care products are suitable for your
FLYER . By using unsuitable lubricants
or care products, you can damage or im-
pact the functionality of your FLYER
e-bike.
49
EN