OPERATION
REgISTER yOUR PRODUCT
CAUTION Burns
The casing surfaces of the appliance and the expelled
air become hot during use (above 90 °C (194 °F)). To pre-
vent burns ensure that the hot surfaces never come into
contact with bare skin.
Damage to the appliance and the environment
!
- Never cover this appliance.
- Never step on the appliance.
2.3
Licences / certificates
- UL (U.S.A) Std. 2021
- CSA (Canada) Std. 22.2 No. 46
2.4
Test symbols
See type plate on the appliance.
3.
Register your product
You must register this product within 90 days of
purchase on our web site in order to activate the
standard warranty or to be eligible for the extended
warranty. Go to our web site at
www.stiebel-eltron-usa.com and click on register
your product.
Before beginning the registration process, we suggest that
you gather the necessary information which will be as
follows:
Type, Example: CK 15 E (from the white label that is on the
right side of the unit)
Number listed after "Nr."
Place of Purchase
Purchase Date
First & Last Name
Email address
Physical Address
Phone Number
IF YOU HAVE ANY QUESTIONS CONCERNING THE REGISTRA-
TION PROCESS OR WARRANTY OPTIONS, PLEASE CONTACT
STIEBEL ELTRON USA DIRECTLY AT (800)-582-8423.
4.
Appliance description
This appliance is wall mounted and is particularly suitable for work
rooms, kitchens, bathrooms, wash rooms and similar.
The external casing of the appliance is made from stove enameled
sheet steel. The sides are made out of plastic. The controls are
located on the right side panel.
The quiet fan draws in the ambient air that is heated by a bare wire
heater element. The air then exits evenly through the hot air chan-
nel and the air outlet grille set into the bottom of the appliance.
The appliance heats up the ambient air inside the room and main-
tains it at the selected temperature.
4
| CK 15-20 E / CKT 15-20 E
4.1
Control with external room temp. controller
(Only applicable for: CK)
2
In rooms larger than 215 ft
(20 m
with a conventional wall mounted room thermostat.
f To do so, turn the temperature selector fully clockwise.
f Control the temperature by using the wall thermostat.
5.
Operation CK 15 E / CK 20 E
1
1 Temperature selector
5.1
Starting heating
The temperature is infinitely adjustable. The appliance stops heat-
ing as soon as the selected room temperature has been reached.
f Turn the temperature selector clockwise to the required
setting.
5.2
Stopping heating / frost protection
To ensure frost protection, the power switch must be
!
in the on position.
f Turn the temperature selector fully counter clockwise.
This position ensures frost protection. The heater starts automati-
cally if the room temperature drops below the frost protection
temperature.
6.
Operation CKT 15 E / CKT 20 E
1
2
1 Temperature selector
2 Timer
2
) you can operate the appliance
WWW.STIEBEL-ELTRON-USA.COM