Functional Description; Controls And Components; Assembly; Operating Instructions - Kawasaki 691225 Manuel D'instructions

FUNCTIONAL DESCRIPTION

5
6
1
4

CONTROLS AND COMPONENTS:

1. Trigger Switch
2. Lock-On Button
3. Collet
Always unplug power tool before changing accessories,
changing collets or servicing.
• To loosen collet nut, press the shaft lock button and rotate the shaft by hand
until the lock engages the shaft preventing further rotation.
COLLET NUT
COLLET
Never force a larger diameter shank into a
collet. Always match the collet nut to the
shank size of the accessory you plan to
use.
• Avoid excessive tightening of the collet nut when there is no bit inserted.
2
5
4. Cord
5. Brushes
6. Speed Control Dial

ASSEMBLY

• DO NOT ENGAGE LOCK WHILE THE
ROTARY TOOL IS RUNNING.
•
SHAFT LOCK
BUTTON
9
8,000-16,000 RPM
3
KEYLESS
before any assembly, adjustments, or adding/removing accessories.
CHUCK
Following this preventative step reduces the risk of the saw coming on acciden-
ASSEMBLY
tally and the risk of damage to the workpiece and injury to the operator.
Never hold the tool near your face. Accessories like wire brushes or grinding
wheels may come apart during use.
will cause the motor to overheat.
Rotary Tool Speed Settings
Medium
Slow
17,000-26,000 RPM
S M

OPERATING INSTRUCTIONS

Disconnect the power plug from the AC power source
Be careful not to cover the air vents with your hand. This
10
High
27,000-33,000 RPM
H
SPEED
CONTROL
DIAL