Inserting External Instruments Into The Ear; Pneumatic Otoscopy; Replacing The Bulb; Spare Parts And Accessories - Riester e-scope Mode D'emploi

3.4. Swivel lens for magnification
The swivel lens is fixed to the device and can be swivelled 360°.

3.5. Inserting external instruments into the ear

If you wish to insert external instruments into the ear (e.g. forceps), you have to turn
the swivel lens (approx. 3x magnification) located on the otoscope head by 180°.

3.6. Pneumatic otoscopy

Pneumatic otoscopy (= an examination of the eardrum), requires a ball which is not
included in normal delivery but may be ordered separately (see Spare parts and ac-
cessories). Take the metal connector, which is not included in the normal scope of
delivery, but can be ordered separately (see spare parts and accessories) and insert
it into the recess provided on the side of the otoscope head. The tube of the ball is
fitted on the connector. You can now carefully fill the necessary amount of air into
the ear canal.

3.7. Replacing the bulb

Otoscope e-scope® with direct illumination
Remove the speculum receptacle from the otoscope. To do so, use your index finger
and thumb to turn it to the left until it stops. You can then pull the speculum receptacle
forwards to remove it. The bulb can be unscrewed anticlockwise. Tighten the new bulb
clockwise and reattach the specula receptacle.
e-scope® otoscopes with fibre optics
Unscrew the instrument head from the battery handle. The LED/incandescent bulb is
located at the bottom of the instrument head. Using your thumb and forefinger or a
suitable tool, pull the bulb out of the instrument head. When switching from an LED
to an incandescent bulb, an optionally available adapter must also be used; when
changing from an incandescent bulb to an LED, this must be removed from the lamp
compartment. Insert the new LED/incandescent bulb firmly.

3.8. Spare parts and accessories

Reusable ear specula
• 2 mm
• 2.5 mm
• 3 mm
• 4 mm
• 5 mm
Reusable ear specula
• 2 mm
• 2.5 mm
• 3 mm
• 4 mm
• 5 mm
Replacement lamps for e-scope
Vacuum, 2.7 V, pack of 6
XL, 2.5 V, pack of 6
for e-scope F.O. Otoscope
®
XL 2.5 V, Packung à 6 Stück No.: 10600
LED 3.7 V
3.9. Technical data of the lamp for e-scope
Vacuum, 2.5 V
XL, 2.5 V
24
Pack of 10 St.
Pack of 10 St.
Pack of 10 St.
Pack of 10 St.
Pack of 10 St.
Pack of 100 St.
Pack of 500 St.
Pack of 1.000 St.
Pack of 100 St.
Pack of 500 St.
Pack of 1.000 St.
Pack of 100 St.
Pack of 500 St.
Pack of 1.000 St.
Pack of 100 St.
Pack of 500 St.
Pack of 1.000 St.
Pack of 100 St.
Pack of 500 St.
Pack of 1.000 St.
otoscope with direct illumination
®
No.: 10488
No.: 10489
No.: 14041
®
300 mA mean life span 15 h
750 mA mean life span 16.5 h
No.: 10775
No.: 10779
No.: 10783
No.: 10789
No.: 10795
No.: 14061-532
No.: 14062-532
No.: 14063-532
No.: 14061-531
No.: 14062-531
No.: 14063-531
No.: 14061-533
No.: 14062-533
No.: 14063-533
No.: 14061-534
No.: 14062-534
No.: 14063-534
No.: 14061-535
No.: 14062-535
No.: 14063-535
otoscope with direct illumination