Maintenance/Care - Warn 84155 Instructions De Montage

WARNING
READ THE VEHICLE'S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARN-
ING LABELS PRIOR TO OPERATION OF ATV
AND WINCH.
WARNING
FAILURE TO SECURELY TIGHTEN ALL BOLTS
ON THE WINCH PLATE, WINCH, AND FAIRLEAD
CAN RESULT IN PRODUCT FAILURE WHICH
MAY RESULT IN VEHICLE DAMAGE AND OP-
ERATOR INJURY OR DEATH. DOUBLE CHECK
THAT ALL BOLTS ARE SECURELY TIGHTENED
PRIOR TO USE.
VI. MAINTENANCE/CARE
Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all
1.
hardware that appears rusted or deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use.
Tighten all nuts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be re-
placed.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND RELATED HARD-
WARE. NEVER OPERATE THE WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO FOL-
LOW THIS WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
WARN INDUSTRIES
©2005 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
WARNING
PAGE 6 84156A0