Cycle Guide - Jennair JDTSS246GM Guide D'utilisation

4.
Add rinse aid
Your dishwasher is designed to use rinse aid for good drying
Ƀ
performance. Without rinse aid, your dishes and dishwasher
interior will have excessive moisture. The heating and drying
options will not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can dry as spots
Ƀ
or streaks. It also improves drying by allowing water to drain off
of dishes after final rinse. Rinse aid does not adhere to dishware,
and when used, it is dispensed during each cycle.
To add rinse aid, open the dispenser
Ƀ
lid by gently pushing in the center of
the lid with your thumb while lifting up
on the edge.
Pour rinse aid into the opening until the indicator level shows
Ƀ
that it is full.
Close dispenser by pushing down gently on the lid.
Ƀ
NOTE: For most water conditions, the factory setting will give
good results.

Cycle Guide

This information covers several different models. Your dishwasher may not have all of the cycles and options described.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for
the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically
compensate by adding time, heat, and water as needed.
CYCLES
The most versatile cycle. This cycle senses the load size, soil amount, and
toughness of soil to adjust the cycle for improved cleaning, using only the
amount of water and energy needed. The Sensor cycle is automatically selected
if you first press the Start/Cancel button. Includes Precision Dry +.*
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and regular
tableware. Includes Precision Dry +.
This cycle is recommended for daily, regular, or typical use to completely wash
and dry a full load of normally soiled dishes. This dishwasher's government
energy certifications were based on the Normal cycle with only the Precision
Dry + option selected.**
Use for lightly soiled items or china and crystal.
For fast results, the 1 Hour wash cycle will clean dishes using slightly more
water and energy. For improved drying, select the Precision Dry + option.
NOTE: Some detergents are not recommended for short wash cycles, please
refer to your detergent packaging for more information.
Use for refreshing clean items that may be dusty from infrequent use, or for
rinsing soiled items that will not be washed right away. Do not use detergent.
This is a specialty cycle that you select from the JennAir
your dishwasher. Your dishwasher remembers this cycle until you replace it by
downloading another cycle from the JennAir
*The government energy certifications are not based on this cycle. See the Normal cycle description for the government energy certification
cycle. Using the Sensor cycle may increase your energy usage.
**No other washing and drying temperature options were selected, and the dishwasher was not subjected to truncated testing. Rinse aid was not
used, and there was no detergent used in the prewash.
18-Jul-2018 10:45:26 EDT | RELEASED
If you are experiencing poor drying performance, you may
want to try a higher setting. Turn the arrow adjuster to a
higher number to increase the amount of rinse aid.
5.
Select a cycle
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Typical cycle time is approximately
2 / hours but can take less or more time to complete depending
1
2
on selections. Press START/CANCEL to select the Sensor cycle or
select another cycle appropriate for your load (see Cycle Guide).
6.
Select options (varies by model)
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not
all options are available for every cycle. If an invalid option is selected
for a given cycle, the lights will flash. Adding options may increase the
cycle time.
7.
Start or resume a cycle
NOTE: If needed, run hot water at the sink nearest your dishwasher
until the water is hot. Turn off water.
Push door firmly closed within 4 seconds of pressing Start/Cancel.
If door is not closed within 4 seconds, the Start/Cancel button LED
will flash, an audible tone will be heard, and the cycle will not start.
IMPORTANT: If the door is opened for any reason after the cycle
is started (even during the delay option), Start/Cancel must be
pressed again.
®
® app.
4
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
ESTIMATED
WASH TIME
W/O OPTIONS
2:30 to 3:30
2:20 to 3:30
1:50 to 3:30
1:45 to 3:30
0:55 to 1:05
0:15 to 0:20
app and download to Variable
WATER USAGE
GALLONS
(LITERS)
3.8 to 7.7
(14.4 to 29.3)
8.4 (31.7)
2.7 to 7.9
(10.4 to 30.0)
2.7 to 7.9
(10.4 to 30.0)
6.2 (23.5)
2.4 (9.0)
Variable