Resetting The Camera - FLIR LOREX LNZ32P4 Série Manuel D'instructions

10

Resetting the Camera

The camera features a hard reset button that is used to reset all camera set-
tings back to the default values. This is useful in case you want to revert cam-
era image settings back to the default values.
To reset the camera:
1. Connect the camera as detailed in 3 Connecting the Camera. Make sure
the camera is powered on.
2. Use the Allen key included with the camera mounting kit to loosen the
dome camera cover screws (x3). Remove the dome camera cover.
#LX400075; r.41474/41994; en-US
31