FLIR LOREX LNZ32P4 Série Manuel D'instructions page 14

4
Installation
3. Insert the camera cable through the hole in the wall mounting bracket.
4. Align the 3 mounting holes on the dome camera base with the 3 corre-
sponding mounting holes on the wall mounting bracket.
Ensure that the cable notch on the dome camera base is aligned with the cable notch
on the wall mounting bracket.
1: Mounting Holes
2: Cable Notch
5. Use the Hex Bolt M4x10 (x3) screws included with the wall mounting
bracket kit to secure the position of the dome camera base.
#LX400075; r.41474/41994; en-US
NOTE
11