Getting Started - Ribimex Pila16 Manuel D'instructions Et D'utilisation

2) Battery
a) Do not attempt to open the battery. If the battery is damaged in any way, stop using it and do
not attempt to recharge it. Short-circuit or electric shock or explosion hazard. Discard it according to
local laws.
b) Protect the battery pack against any heat source (e.g. direct sunlight exposure, fire, heater...).
Do NOT incinerate the battery pack. To prevent any damage or explosion hazard.
c) Do not expose the battery pack to water, moisture and cold. To prevent any damage.
d) In case of damage and improper use of the battery, vapours may be released. Ensure proper
ventilation and provide for fresh air to the work area. The vapours can irritate the respiratory
system.
e) Only use the battery pack provided with the product. The use of other types of batteries may
increases the risk of electric shock, personal injury and damage.
f) Use only original batteries or recommended by the manufacturer with the voltage matching
your product, as listed on the nameplate. When using other batteries (e.g. reconditioned batteries or
other brands), there is risk of explosion causing injury or property damage.
g) Charge battery pack only at ambient temperatures between +10C and +40C. Store the battery
in a dry location protected from cold where temperature would not exceed +40C. To prevent any
damage to the battery.
h) Do not store or carry a battery in a pocket, toolbox or any other place where it may come into
contact with metal objects. The battery pack terminals may be short-circuited causing damage to the
battery or burns or a fire.
i) If the battery is damaged and leaks, avoid contact with skin and eyes. If contact happens, immediately
seek medical advice.
IV. GETTING STARTED
4.1- Unpacking
- Remove all items from carton.
- Check items for any shipping damage.
4.2- Assembly
4.2.1- Spray wand
Connect the hose connector to the handle.
Connect the wand connector to the handle.
Connect the wand connector to the nozzle.
Before each use, check that the connectors are properly tightened.
4.2.2- Cart
Refer to assembly instructions provided with the cart.
4.2.3- Fuse
Insert the fuse into the fuse socket.
4.3- Battery
- Read carefully the battery safety instructions.
- Do not use other batteries than those provided with the product.
- Do not use other charger than the one provided with the product.
- Recharge battery before first use.