Epson ELPLX03 Mode D'emploi page 7

Insert the lens unit straight so that the
E
protruding points on the lens fit through the
holes (2 points) at the top of the lens unit.
While holding the lens unit firmly, hold the lock
F
lever and turn it clockwise to lock the lens unit.
Check that the lens cannot be detached.
If it cannot be locked, the lens unit is at an angle.
Remove and then reinstall the lens unit.
* To further secure the lever, tighten the screw. You
can turn the screw by hand.
Tighten the screws (4 points) to fix the lens unit.
G
Tighten the four screws equally to prevent the lens
from being installed at an angle.
Turn the screws by hand.
中
文
简
体
中
文
繁
体
日
本
語
7