Technical Information; Technical Data; Safety Devices - Nussbaum POWER LIFT HL 2.60 SST DG Manuel D'exploitation

3. Technical information

3.1 Technical data

Load carrying capacity
Load distribution
Lift time Lift
Lowering time
Operating voltage
Motor capacity
Motor speed
Oil pump conveying power
Lift operating pressure
Lift pressure relief valve
Operating pressure unlocking cylinders
Oil container filling volume
Noise level L
pA
on-site connection

3.2 Safety devices

1. Over-pressure valve
Hydraulic system fuse against over-pressure
2. Check valve
Secure the vehicle against unauthorised lowering
3. Main switch with curtain lock device
Fuse to prevent unauthorised use
4. CE stop
Guard against crushing in the foot area
5. Hydraulically unlockable safety system on the cylinders
Secure against unauthorised lowering of the lift.
6. Up Off
Safety against a vehicle driving too widely onto the lift.
7. Foot bumper for standard lifting arms
Guard against crushing in the foot area
Lift
Operating Manual and Inspection Book
POWER LIFT HL 2.60 SST DG
6000 kg
max. 3:1 mm or against the drive- in direction
approx. 65 sec. with 5900 kg load
approx. 65s with CE stop and 5900 kg load
3 x 400 Volt, 50 Hz
1.5 kW (991033)
1400 rpm
5.8 cm³
approx. 205 bars
approx. 215 bars
approx. 35 bars
per unit approx. 17 litres
 70 dB
3~/N+PE, 400V, 50 Hz
with fuse 16 Amp slow blow
according to VDE regulation
- 11 -