Nussbaum POWER LIFT HL 2.60 SST DG Manuel D'exploitation page 77

Organisational measures
- The operating manual is always to be kept ready at the location of use of the system.
- Supplemental to the operating manual, refer to and comply with generally valid legal and
other binding regulations for accident prevention and for environmental protection.
- Check occasionally that personnel have an awareness of hazards and safe work in
compliance with the operating manual!
- Use personal protective equipment as needed or required by regulations.
- All safety and hazard information on the system is to be kept in a legible condition!
- Replacement parts must meet technical specifications of the manufacturer. This is only
guaranteed for original parts.
- Deadlines pre-set or given in the operating manual for repeating tests / inspections must
be followed
Maintenance work, error removal
- Comply with pre-determined setting, maintenance and inspection work and intervals in
the operating manual, including details for exchanging parts / part fittings! These
activities may only be done by specialists who have participated in a special factory
training.
Guarantee and liability
- In principle, our "General sales and supply conditions" apply.
Guarantee and liability claims for personal and property damage are excluded if due
to one or more of the following causes.
- Improper use of the system
- Improper assembly, commissioning, operation and maintenance of the system
- Operating the system with defective safety devices or improperly attached or non-
functional safety and protection devices.
- Non-compliance with information in the operating manual in terms of transport,
storage, assembly, commissioning, operation, maintenance and fitting of the system.
- Independent construction changes to the system.
- Independent changes to ..... (for example drive ratios: power, rotation speed, etc.)
- Improperly done repairs.
- Catastrophic cases due to foreign influences or force majeure.
Operating Manual and Inspection Book
POWER LIFT HL 2.60 SST DG
- 5 -