13
Using your Appliance
This section tells you how to use most of the useful features. We recommend that you
read through them carefully before using the appliance.
Getting Cold Water
The water dispenser is located in the left
side of the fridge. Open the refrigerator
doors, and push the water dispenser
button to get water,. Then move your glass
down the dispenser lever in the suggested
position and press it.
Hold the glass underneath the dispenser
for 2~3 seconds after releasing the
dispenser button as water may continue to
dispense after the button is released.
Water clouding phenomenon
All water provided to the refrigerator flows
through an alkaline water filter. In the
filtering process, the pressure of the water
that has flowed out of the filter is increased,
and the water becomes saturated with
oxygen and nitrogen. When water flows
out into the air, the pressure plummets and
the
oxygen
and
supersaturated, which results in gas
bubbles. The water may temporarily look
misty or cloudy due to these oxygen
bubbles. After a few seconds, the water
will look clear.
1. Changing the water filter
To drink the freshest and cleanest water
from your refrigerator, change the filter on
time.
To change the water filter, follow these
steps:
1. Shut off the water supply. Then turn the
water
counter-clockwise.
2. Pull the water filter (A) from the filter
holder (B).
Note:
the water supply valve.
water filter because impurities in the water
cause it to stick. If you are having
difficulties, grip the water filter firmly and
nitrogen
get
pull it out.
water can leak from the opening. This is
normal. To minimize the water leaks, keep
the filter cartridge horizontal when pulling
it.
filter tray(C) and dry around the filter case.
directions below.
filter
(A)
about
To change the water filter easily, shut off
Sometimes, it is hard to disassemble the
When you pull the water filter, a little
To prevent overflow, empty the water
To insert the new water filter, follow the
a
1/4
turn,