3TECH TR-720L Guide D'utilisation page 18

Electricity board
– Power in: 12-24V
– Power out: 2.5-3.5V (adjustable)
– Output delay: 0-12s (adjustable)
– Linkage air pressure: P>0.2MPa
– Control ways: 2 ways
Installation
– Connect power in line with POWER IN 12-24V end.
– Electricity lines from the tube connect with the power out end (L1 or L2) of the electricity
board.
– Connect the electricity board and the air in tube with a T-Connector.
– Air1 corresponding to L1, and Air2 to L2.
– Connect the electricity; step on the foot controller; the indicator light is on; fi bre optic
illuminated hand-piece works. See fi gure 3 for more detail.
18
Electric wire in the tube
Electrodes
Power in (12-24V)
No
Replac
–
–
–
Fig. 2
–
–
C
–
Insert q
it'
–
Hold th
No
Fig. 3