Environmental Information; Rating Plate Data - Hunter TCX3000 Manuel D'instructions

ENVIRONMENTAL INFORMATION

This product may contain substances that can be hazardous to the environment or to human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these substances and to improve the use of natural resourc-
es.
Electrical and electronic equipments should never be disposed of in the usual municipal waste but must be separately
collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you of the need to dispose of properly the
product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the substances contained in these products, or
their improper use, or improper use of their parts may be hazardous to the environment or to human health.
Furthermore this helps to recover, recycle and reuse many of the materials used in these products.
For this purpose the electrical and electronic equipment producers and distributors set up proper collection and treatment systems for these
products.
At the end of life your product contact your distributor to have information on the collection arrangements.
When buying this new product your distributor will also inform you of the possibility to return free of charge another end of life equipment
as long as it is of equivalent type and has fulfilled the same functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties prescribed by the national provisions in the
country where the product is disposed of.
We also recommend you to adopt more measures for environment protection: recycling of the internal and external packaging of the product
and disposing properly used batteries (if contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce electrical and electronic equipments, to minimize
the use of landfills for the disposal of the products and to improve the quality of life by preventing that potentially hazardous substances
are released in the environment.
The rear of the machine carries an identification plate with the
following information:
1- Manufacturer's data
2- Model
3- Serial number
4- Phases
5- Voltage
6- Frequency
7- Power consumption
8- Power absorption
9- Pneumatic system pressure
10- Weight of the machine
11- Year of construction
12- Hydraulic pressure
7&;

17. RATING PLATE DATA

5
7
8
10
60
(1*/,6+ ‡ ,QVWUXFWLRQV PDQXDO
4
6
9
12
1
3
2
11