Troubleshooting; Warranty; Disposal - Dometic PERFECTVIEW VT150DIG Instructions De Montage Et De Service

Troubleshooting

9 Troubleshooting
Fault
The monitor displays the
message "NO SIGNAL".
The monitor displays the
message "NO VIDEO
SIGNAL".
Irregular image playback
or yellow warning triangle
on the screen.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and warranty processing, please include the following documents when you send in the
device:
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
11

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
16
Cause
The transmitter module is
not working.
The transmitter module is
not receiving a video sig-
nal.
–
Suggested remedy
Check the voltage supply.
Check the camera connection and
function.
Make sure that the antennae of the
receiver module and the transmitter
module are firmly connected.
Check the reception bars on the moni-
tor. If only one reception bar is dis-
played, change the position of the
transmitter or receiver module.
Check if the battery charge is sufficient.
VT150DIG
EN