Technical Data; Noise Information - Worx Sonicrafter WX678 Mode D'emploi

1. HYPERLOCK
2. ON/OFF SWITCH
3. VARIABLE SPEED DIAL
4. VENTING SLOTS
5. UNIVERSAL-FIT ACCESSORY INTERFACE*
6. SMALLER FLANGE FOR OTHER BRANDS' SANDING PADS
7. FLANGE
Not all the accessories illustrated or described are included in standard delivery.
*Works with other oscillating tool brands' accessories.
The following compatible brands are trademarks owned by third parties which may
be registered by their respective owners: Bosch
Fein .
®

TECHNICAL DATA

Type WX678 (6-designation of machinery, representative of high frequency
oscillation tool)
Voltage
Oscillations speed
6
Oscillations angle
Tool weight
** Voltage measured without workload. Initial battery voltage reaches Maximum of 20 volts.
Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
PA WA
Wear ear protection when sound pressure is over
Oscillating Tool
ACCESSORY CLAMPING LEVER
TM
, Black & Decker , Makita
® ®
and
®
20V Max**
5000-20000/min
3.2°
1.4kg
L : 76dB(A)
pA
L : 87dB(A)
wA
3.0dB(A)
80dB(A)
EN