On-Wall Mounting - Elipson Infinite 8 Mode D'emploi

FR

ON-WALL MOUNTING

a b
1. Wall brackets
Elipson Infinite loudspeakers come with 4 wall brackets for on-wall installation.
Prior to installation, make sure the brackets have been securely fastened flat against the
wall and that the wall is able to bear the weight of the loudspeakers.
a/ Place the on-wall template (included) on the wall or ceiling. We recommend using a
spirit level to verify the alignment of the speakers.
Use scotch tape to hold the template in place and mark each of the template's 4 holes
with a pencil.
b/ Remove the template and drill each of the 4 holes marked in the previous step.
Elipson is not responsible for damage or defects resulting from incorrect speaker
installation.
c/ Make sure that the screws heads are wider than the notches. A large flat washer may
be used for additional security.
c
32
d e
2. Mounting the speakers
d/ Connect the speaker wire to the loudspeaker. Place the speaker onto the screw heads.
e/ Verifying that the cabinet's weight is securely resting on the four brakets.
c/ Your Elipson Infinite loudspeaker is now ready.
33
f