Seko TEKNAEVO TPR Mode D'emploi page 3

You can access the programming menu by pressing the
be used to run through the menu items, with the
The pump is programmed in constant mode in the factory. The pump automatically returns to the operating mode
after 1 minute of no activity. Any data entered in these circumstances will not be saved. The
to exit the various programming levels. Upon exiting programming, the display will show:
Exit
No Save
Setpoint
7.00 pH
Setpoint Type
Acid
Prop. Band
0.50 pH
Alarm Band
2.00 pH
O.F.Alarm
0m
Resolution
0.01
Paragraph 4
Paragraph 2
EM00136063
Programming menu Tekna TPR
Exit
 
-
Configuration
Probe Calib.
On
Configuration
-
Pump Functions
Max flow rate
100%
Alarm Relay
N.Open
Pump
Paragraph 1
pH Measure
-
Functions
Pump
Functions
Redox Measure
key for over three seconds. The
key being used to access changes.
Save
PROG
Prog
+
Main
Menu
Temperature Man.
25 °C
+
Setting Language
English
Menu
Paragraph 5
Functions
+
Menu
Pump
Functions
Manual
rev. 2.2 EN
to confirm the selection
Paus
N.Open
Paragraph 7
Paragraph 6
Paragraph 3
keys can
key can be used
Paragraph 11
Paragraph 10
Paragraph 9
Paragraph 8
2