Specifications; Dimensions - Simplicity Regent Série Manuel D'instruction

Masquer les pouces Voir aussi pour Regent Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 107
NOTE: Specifications are correct at time of printing and are subject to change without notice.
ENGINE:
16.5 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
I/C
Horsepower
16.5 @ 3600 rpm
Displacement
30.5 cu in. (500 cc)
Electrical System
12 Volt, 9 amp Alternator, Battery: 230 CCA
Oil Capacity
48 oz (1,4 liters)
CHASSIS:
Fuel Tank Capacity
Capacity: 3.5 gallons (13,2 liters)
Rear Wheels
Tire Size: 20 x 8.0-8
Inflation Pressure: 10 psi (,68 bar)
Front Wheels
Tire Size: 15 x 6.0-6
Inflation Pressure: 12-14 psi (,82-0,96 bar)
*Briggs & Stratton Models: The gross power rating for individual gas engine models is labeled in accordance with SAE
(Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating
performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are
derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is
affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide
array of products on which engines are placed and the variety of environmental issues applicable to operating the
equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment
(actual "on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to,
accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient
operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

Specifications

TRANSMISSION:
K46
Type
Hydrostatic Tuff Torq K46
Hydraulic Fluid
10w 30 Premium Engine Oil
Speeds
Forward: 0-5.5 MPH (9.0 km/h)
@ 3400 rpm
Reverse: 0-3.0 MPH (4.6 km/h)
Continuous Torque
170 ft-lbs (230,5 Nm)
Output
Drawbar Rating
227 lbs (103 kg)
Maximum Weight
675 lbs (306 kg)
on Axle

DIMENSIONS:

Overall Length
72" (183 cm)
Overall Width
37" (94 cm)
Height
45" (114 cm)
Weight
16.5 hp Tractor
w/ 38" Mower Deck
480 lbs (218 kg)
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Regent 2690822Regent 2690836

Table des Matières