Mad Catz F.L.Y. 5 Mode D'emploi page 3

Remove the adjustment tool from the
compartment on the stick base.
c
Insert the adjustment tool into the locking nut
(b) and turn counter-clockwise. Press the
locking pin (c) in and move the stick forward or
backwards to the required angle. Lock by
turning locking nut (b) clockwise.
b
a
Press the locking switch (a) and move the
stick up or down to adjust the height.
Insert the adjustment tool into the locking nut
(d) and turn counter-clockwise to unlock the
head mechanism. Move to the required angle
and lock by turning the locking nut clockwise.
3
d