Titan PowrPlast 600 Mode D'emploi page 30

GB
table of contents
table of contents
1 SAFety ReGuLAtIONS ______________________ 31
2 INtRODuctION tO WORkING WItH tHe
MORtAR SPRAyING MAcHINe POWRPLASt 600 33
2.1 Function of the mortar spraying machine
PowrPlast 600 _______________________________ 33
2.2 Processible coating materials ___________________ 33
3 tecHNIcAL DAtA ___________________________ 33
4 exPLANAtORy DIAGRAM FOR POWRPLASt 600 34
4.1 Operating elements and displays on device _______ 35
4.2 Drive _______________________________________ 36
4.3 Compressor (accessory) _______________________ 36
4.4 Mortar hose for pneumatic spray lance ___________ 36
4.5 Mortar hose for automatic spray lance ___________ 36
4.6 Spray lance _________________________________ 37
5 tRANSPORtAtION __________________________ 38
5.1 Moving _____________________________________ 38
5.2 Transportation in vehicle ______________________ 38
6 cOMMISSIONING ___________________________ 39
6.1 Installation location ___________________________ 39
6.1.1 Connection to mains power supply/ Extension cable 39
6.2 Initial starting-up _____________________________ 39
6.2.1 Scope of supply ______________________________ 39
6.2.2 Assembly ___________________________________ 39
6.3 Connecting the mortar hose ___________________ 40
6.3.1 Automatic spray lance _________________________ 40
6.3.2 Pneumatic spray lance ________________________ 40
6.4 Compressor (accessory) _______________________ 40
6.5 Spray attachment assembly (accessories) _________ 40
6.6 Connecting the spray lance ____________________ 41
6.7 Remote control (accessory) ____________________ 41
6.7.1 Remote control assembly ______________________ 41
6.8 Preparing the mortar spraying machine __________ 42
6.8.1 Rinse the mortar tube (Automatic spray lance) ____ 42
6.8.2 Rinse the mortar tube (Pneumatic spray lance) ____ 43
6.9 Beginning of the spraying process _______________ 43
6.10 End of the spraying process ____________________ 43
30
7 GeNeRAL INFORMAtION ABOut tHe
APPLIcAtION tecHNIQue ___________________ 44
7.1 Spraying technique ___________________________ 44
8 SHuttING DOWN AND cLeANING ____________ 44
8.1 Cleaning the mortar hose ______________________ 44
8.2 Cleaning the device and replacing the stator ______ 44
8.3 Cleaning the spray lance _______________________ 46
9 MAINteNANce _____________________________ 46
9.1 Mechanical maintenance ______________________ 46
9.2 Electrical maintenance ________________________ 46
9.3 Long periods of non-usage _____________________ 46
9.4 Rotor replacement ___________________________ 46
10 eLIMINAtING FAuLtS ________________________ 47
11 SPARe PARtS LISt FOR POWRPLASt 600 _______ 50
12 SPARe PARtS LISt OF cARRIAGe ______________ 51
13 SPARe PARtS LISt OF SPRAy LANce __________ 52
14 POWRPLASt 600 AcceSSORIeS _______________ 53
Testing of the mortar spraying machine _______________ 55
Note on disposal __________________________________ 55
Important information on product liability_____________ 55
Guarantee declaration _____________________________ 55
CE declaration of conformity _______________________ 110
Service network _________________________________ 112
PowrPlast 600