Assembly - KERN MBC-A01 Notice D'utilisation

8 Assembly

How to assemble the height meter:
Attach the head stop (1) to
the left side of the
measuring rod and shift it
to the zero mark (2) of the
scale.
Attach the foot stop (3) to
the right side of the
measuring rod and shift it
to the left as far as you
wish.
Hold the foot stop in the
area of the measuring rod
when shifting it (4)
How to attach the height meter to the weighing scale:
Attach the height meter to the bottom end of the weighing scale with the help of the
supplied screws.
When screwing down the height meter make sure that you do
not apply too much pressure on the weighing pan as that may
damage the weighing cell.
9 MBC-A01-BA-e-1914