Dyna-Glo DGN405SNC Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS
10. With shelf upside down, attach side shelf
support – left rear/right front (W) and side shelf
support – left front/right rear (I) to side shelf
(A) using four M6x12 bolts (AA) on each side.
Repeat for remaining shelf (A).
Hardware Used
M6x12 Bolt
AA
11. Attach charcoal access door (E) to lid and
firebox assembly (B). Insert two hinge bolts
(HH) into hinges on charcoal access door (E)
and secure with two cotter pins (FF).
Hardware Used
HH Hinge Bolt
FF
Cotter Pin
12. Attach right side shelf (A) to lid and firebox
assembly (B) using four M6x20 bolts (BB).
Repeat on left side with remaining side shelf (A).
NOTE: First secure two upper M6x20 bolts (BB),
then lower M6x20 bolts (BB).
Hardware Used
M6x20 Bolt
BB
10
x 8
A
11
B
x 2
E
x 2
12
B
x 8
9
I
FF
AA
W
HH
A
BB