When first using, try out the toasting
setting, as the result depends upon the type
of bread and the degree of moisture.
Generally speaking, a higher temperature is
required for breads other than white.
Turn the toasting grade selector to a lower
number if, for example, only one slice of
bread is being toasted.
Caution:
Relatively dry slices of bread, or bread that
has already been toasted once, will brown
much more quickly and may under certain
circumstances catch fire. Therefore set the
heat control to a lower setting and do not
leave the toaster unattended.
Toasting
I Fully depress the lowering lever, which
will then lock into position (4).
This then causes the appliance to switch on.
Taking out the toast
I After completion of the toasting operation,
the toast will automatically be raised and
the appliance will switch itself off (5).
I Take out the slices of toast.
To break off the toasting operation before it
is completed, simply press the lowering
lever upwards or turn the toasting regulator
on "stop" position (8).
Note: Should a slice of bread become
trapped in the toasting well, pull out the
mains plug, let the appliance cool down and
then carefully free the toast without
touching the heating elements.
Additional accessories
depending on the model
Roll support (Mod. 151)
I Raise the roll support by swivelling the
two lifter grips upwards (6).
I Place the rolls on the support and select
the
position .
Switch on the appliance (7).
To improve the results, turn the rolls over
and repeat the toasting operation.
After use, lower the roll support by
swivelling the two lifter grips downwards.
The roll support should not be used for
longer than 10 minutes.
Rewarming function (Mod. 151)
With this toaster, you have the possibility of
rewarming toast which has already cooled
down.
I Do this by setting the selector switch to
the
position (7) and then switch on the
appliance.
The toast will be raised automatically as
soon as the rewarming operation is
completed.
Cleaning
Before commencing the cleaning operation,
pull out the mains plug.
Do not dip the appliance into water.
Never use an abrasive sponge to clean the
toaster. Clean it with a moist cloth and then
dry it with a soft cloth to keep it bright.
Regularly remove crumbs and bits of toast.
Before pulling out the crumb drawer, allow
the toaster to cool for at least ten minutes
after completion of the preceding toasting
operation.
I Pull out the crumb drawer and shake out
the crumbs (9).
Clean with a moist cloth and then replace
the crumb drawer.
Never use the toaster without the crumb
drawer in position.
Disposal
The packaging comprises exclusively
environmentally-friendly materials
which should be disposed of
according to the local recycling
arrangements.
Disposal methods for the appliance
itself can be found by enquiry at the
appropriate department of the local
authority.
Environnement protection first !
YiZ Your appliance contains valuable
materials which can be recovered or
recycled.
· Leave it at a collection point.
7