Tivoli Audio ALBERGO + Mode D'emploi page 9

Radio réveil
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
1. Multi-funCtion ContRol WHeel (toP): The control wheel conveniently serves
many functions:
a. Power: When the Albergo+ is off, press to power the unit on. When the Albergo+
is on in any source, press to power the unit off.
b. Volume: When the Albergo+ is on in any source, rotate clockwise to increase
the volume level and counter-clockwise to decrease the volume level.
c. snooze: Press to engage Snooze when the alarm sounds. An
the display when Snooze is active. The Snooze time is fixed at 10 minutes. Pressing
the Snooze button again while still in Snooze mode will re-set the Snooze timer back
to 10 minutes. While the alarm is sounding, press and hold down the Snooze button
to turn off the alarm and the unit, or press the respective alarm button.
2. lCD:
M
T
PM
P
: (center digits): Time
AUX: Auxiliary
FM: FM band
: Sleep timer
: Reception level
: Bluetooth mode
3. tune +/-: In DAB mode, use these buttons to show all available DAB/DAB+ stations.
Use the +/- buttons to highlight specific stations and the highlighted DAB station will
tune automatically after 3 seconds, or press the Enter button on the remote control.
FM: Press the Tune +/- buttons briefly to Auto Scan to the next station detected. See
"Auto Scan" under "FM Menu" on how to disable Auto Scan and tune stations manually.
4. sleeP: Press repeatedly to activate the amount of time the radio will play before it
turns off automatically, and or press the Select button on the remote control to select
that time. A small clock face
To cancel Sleep, press the Sleep button until the display shows "Off".
5.
BLUETOOTH: Press to enter Bluetooth mode. See "Bluetooth Operation" for more
information. Press and hold the Bluetooth button to clear the memory of all paired
devices. The display will show "Memory Cleared".
6. souRCe: Press repeatedly to change sources.
7.
alaRM 1 anD 2: Press to set the desired wake time for either alarm and
automatically set the alarm to wake.
8. alaRM Knob: After pressing either Alarm button, rotate this knob to set the hour and
push the knob in to Enter, then do the same for the minutes and press the knob in when
done, or the alarm time will set automatically after 3 seconds. The alarm will be set to
9 – ENGLISH
FM
P
DAB: DAB/DAB+ band
M: Mono
PM: When 12 hour clock is selected
T: Manual tuning mode
will show on the display when the Sleep timer is active.
icon will show on
AUX
: Snooze timer
: Alarms 1 and 2

Publicité

Table des Matières
loading

Table des Matières