Remote Control - Predator P20WIFI Mode D'emploi

OPERATING MODES
7- Mosquito killer function
Before pressing the mosquito killer function, please check the insect waste tray is
installed properly. (FIG.1).
a. If the waste tray is not installed correctly (FIG.2), this function can not be
activated and 3 warning beeps will be heard.
b. Once the tray is installed correctly, press the Anti-mosquito button and
after 1 minute, the function will be activated.
c. Ckeck the insect waste tray regulary to eliminate the possible remains.
IMPORTANT: TURN OFF THE UNIT BEFORE REMOVING THE TRAY.
8- COOL
a. Make sure that the water level is between
MAX and MIN (FIG.3).
b. Press the COOL button. The cold indica-
tor light comes on and the unit will start
pumping water dissipating the air into the
room.

REMOTE CONTROL

a. Before using the remote control, remo-
ve the plastic protector from the bat-
tery.
b. The control functions works the same
as the control panel.
FIG. 1
FIG.1F
17
FIG. 1
IG.2
FIG. 3