LEXIBOOK Karaoke Micro Star 2 Mode D'emploi page 26

CONNECTING AN EXTERNAL UNIT
To connect an external unit such as an
electronic instrument: guitar, keyboard...
or a CDG player (not included) to the
Karaoke Micro Star
RCA/Audio cable (not included) from the
RCA/Audio input jack to the AUX OUT
jack on the external unit. This will enable
you to broadcast sound from this external
unit through the Karaoke Micro Star
speakers. Please ensure both units are
switched on. Use the master volume control to adjust the sound level.
Notes :
• Please refer to the external unit's owner manual before connecting.
• Make sure the power is off and both units are unplugged before connecting an
external unit.
• The Line-in cable cannot be connected at the same time as the RCA/Audio-in
cable.
To raise or lower the top stand bar, rotate the connector/adjustment knob anti-
clockwise to loosen and slide the top stand bar up or down. Rotate clockwise to
secure.
2, simply connect an
®
2's
®
STAND ADJUSTMENT
26