Ribind JOLLY BIG ONE Mode D'emploi page 27

Connect the power supply cable to the clamps provided.
CAUTION: Make the connections according to the chart below (OPEN button with OPEN clamp,
CLOSE button with CLOSE clamp and connect the direct phase of the power supply to the COM
clamp).
B = CAP =
Electrobrake Capacitor
Screw the run stop cover back on.
Verify that the switch is on INS (In this phase the micro-switches do not work and the C1 and
C2 run stop cams are automatically regulated).
B
M2 M1
OPEN
CLOSE
KEY SELECTOR
27
PUSH BUTTON
POWER SUPPLY
CLOSE
OPEN
G
B
N
L