Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connect wiring.
1 6
1
Fan
2
Connect power cable to wiring
plate (from parts bag) using UL
approved connector. Connect
house wiring to fan wiring. Refer
to wiring diagrams for connection
details. Use screw (from parts
bag) to secure wiring plate to fan
housing. Re-install wiring panel
and secure with screw from parts bag.
Install housing mask.
1 7
Tape mask into housing.
Mask protects unit during
construction. Remove
before attaching grille.
Install ceiling material. Cut
out around housing.
Attach cable clamps to Knockout
Plate. Knockout Plate mounts to
outside of Housing and may be
oriented as desired.
Light
2
Connect wires
Screw from
3
1
Attach grille.
1 8
Parts Bag
4
2
3
If grille spring becomes
dislodged from grille - snap it
back into place as shown.
4
1
Plug in
Sensor
3
3
4
4
2
Plug in
Light
Publicité
Table des Matières
