Special Requirements; Connecting To A Building's Electrical System; Portable Generator Location - Briggs & Stratton PowerBoss 030628 Manuel De L'opérateur

Special Requirements

There may be Federal, local codes, or ordinances that
apply to the intended use of the generator. Please
consult a qualified electrician, electrical inspector, or
the local agency having jurisdiction:
This generator is not intended to be used at a
construction site or similar activity as defined by NFPA
70-2014 (NEC) section 590.6.

Connecting to a Building's Electrical System

Connections for standby power to a building's electrical
system must be made by a qualified electrician. The
connection must isolate the generator power from utility
power or other alternative power sources and must
comply with all applicable laws and electrical codes.
WARNING Generator voltage could cause
electrical shock or burn resulting in death or
serious injury.
• Use approved transfer equipment to prevent backfeed by
isolating generator from electric utility workers.
• When using generator for backup power, notify utility
company.
• DO NOT touch bare wires or receptacles.
• DO NOT use generator with electrical cords which are
worn, frayed, bare or otherwise damaged.
• DO NOT operate generator in the rain or wet weather.
• DO NOT handle generator or electrical cords while
standing in water, while barefoot, or while hands or feet
are wet.
• DO NOT allow unqualified persons or children to operate
or service generator.

Portable Generator Location

Before starting the portable generator there are two equally
important safety concerns regarding carbon monoxide
(CO) poisoning and fire that must be addressed.
Operation Location of Portable Generator to REDUCE
THE RISK OF CARBON MONOXIDE POISONING
All fossil fuel burning equipment, such as a portable
generator, contains carbon monoxide gas in the engine
exhaust, a poisonous gas that could kill you in minutes.
You CANNOT smell it, see it, or taste it. Even if you do
not smell exhaust fumes, you could still be exposed to
carbon monoxide gas. The following must be completed
prior to starting the portable generator engine:
• By law it is required in many states to have a
Carbon Monoxide alarm in operating condition
in your home. Install/maintain battery-operated
carbon monoxide alarms or plug-in carbon
monoxide alarms with battery back-up according to
the manufacturer's instructions. A CO alarm is an
electronic device that detects hazardous levels of
CO. When there is a buildup of CO, the alarm will
alert the occupants by flashing visual indicator light
and alarm. Smoke alarms cannot detect CO gas.
Carbon
Monoxide
Alarm
9