Maintenance
Door reversal (applicable models only)
WARNING
• Tilting/laying the refrigerator requires minimum of 2 people.
• Disconnect power source and water line before reversing the doors.
• If the unit is allowed to lay on its back or side for more than an hour, let it stand for
15 minutes after it is returned to the upright position before plugging it in.
Tools required (not provided)
Phillips screwdriver
⅜" (10 mm) socket wrench
Accessories (provided)
Top-left hinge cover
CAUTION
Throughout the entire reversing procedure, keep all the small parts (screws, caps, etc.) of
the refrigerator away from children or infants for safety reasons.
NOTE
• Samsung recommends that reversing of the door opening is only completed by
Samsung approved Service providers. This will be on a chargeable basis at the customer
expense.
• Before reversing the doors, put a protective material (such as a cardboard box) on the
floor where you can safely place the removed parts, preventing any damage throughout
the whole process.
22
English
Barosa_NA_DA68-02676V-01_EN.indd 22
Flat-head screwdriver
3/16" (5 mm) Allen wrench
Screw covers (2)
7/11" (11 mm) spanner
2020-06-10
2:58:03