Connecting The Hx410 And Hx115 - Hartke HyDrive HX115 Manuel Du Propriétaire

Connecting the HX410 and HX115

IMPORTANT: There is a minimum safe impedance so be sure to check the manu-
facturer's recommended impedance for your amplifier to avoid any damage to your
amplifier or voiding your warranty.
Connecting the HX410 and HX115
to Your Amplifier
The HX410 and HX115 connections
are made via either the 1/4" phone
jacks or Speakon connectors located
on the rear panel jack-plate. Be sure
to make your connection with un-
shielded speaker cable. Connect the
Amplifier Output to the speaker Input
on the HX410's or HX115's rear jack-
plate.
Using the EXTENSION Output
The HX410 and HX115 provides
a convenient Extension Output
for connecting additional speaker
cabinets in parallel. Be sure to read
the section above on impedance to
insure a proper hook-up with your
amplifier. Follow the steps below to
connect two HX410 or HX115's using
the Extension Output. Connect the
Amplifier Output to the Input of the
first HX410 or HX115. Now, connect
the Extension Output to the Input of
the second cabinet.
Hartke Systems
Distributed Exclusively by
Samson Technologies Corp.
Hicksville, New York 11802
MODEL 2000
~ AC INPUT
200 WATTS 115V/230V 50/60Hz
8 = 120 WATTS FUSE
5A/250V, 180W (115V)
4 = 200 WATTS
2.5A/250V, 450W (230V)
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
SERIAL NUMBER
ASSEMBLED IN R.O.K.
Hartke Systems
Distributed Exclusively by
Samson Technologies Corp.
Hicksville, New York 11802
MODEL 2000
~ AC INPUT
200 WATTS
115V/230V 50/60Hz
8 = 120 WATTS FUSE
5A/250V, 180W (115V)
4 = 200 WATTS
2.5A/250V, 450W (230V)
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
SERIAL NUMBER
ASSEMBLED IN R.O.K.
4
EFFECT
RETUIRN SEND
SPEAKER OUTPUTS
HPF
OFF ON
8 8
8
EFFECT
RETUIRN SEND
SPEAKER OUTPUTS
HPF
OFF ON
8 8
8