Cooling Off mode (also called Shop mode),
is designed for use by retailers when they
Cooling Off
Cooling Off
are displaying refrigerators on the shop
Mode
Mode
fl oor. In Cooling Off mode, the refrigerator's
fan motor and lights work normally, but the
compressors do not run, and the refrigerator
and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Energy Saver button and the Power
Freeze button for 5 seconds during normal
operation. The refrigerator chime sounds and
the temperature display fl ashes OF OF.
To cancel Cooling Off mode, touch and hold
the Energy Saver and the Power Freeze
buttons again for 5 seconds.
If you don't want to make more ice, touch
( 9 ) Ice Off
( 9 ) Ice Off
the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
If you do not press any button(letters not ICON), the
display turns off in a few seconds.
If you press any button(letters not ICON), the
display lights up again.
The function key will operate after you remove
your fi nger from the letters except E.Saver, Ice
and Water key.
Water fi lter usage
( 10 ) Filter
( 10 ) Filter
This icon will light up when you need to
change the fi lter. After you use about 300
gallons of water, the fi lter indicator lights
up. (about 6 months). After you install the
new water fi lter, reset the fi lter indicator
by touching the Alarm/hold 3 sec for Filter
Reset button.
12_ operating
DA68-02488A.indb 섹션11:12
DA68-02488A.indb 섹션11:12
We recommend you stop ice making
if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and energy.
- Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and
the water Line is not connected, there
will be a water valve noise from the
back of the unit, press the Ice Off
(Hold 3sec for child lock) button for
less than 3 seconds until the Ice Off
Indicator (
) illuminates.
• If water is not dispensing or
dispensing slowly, you need to
replace the water fi lter because the
water fi lter is clogged.
• Some areas have large amounts of
lime in their water, which causes the
water fi lter to clog more quickly.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands of
WARNING
water fi lters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property damage
caused by water leakage from use of a generic water
fi lter. SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you know when
it is time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red
light comes on just before the capacity of the
current fi lter runs out. Changing the fi lter on
time provides you with the freshest, cleanest
water from your refrigerator.
1. Shut off the water supply. Then, turn the water fi lter
( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).
• To change the water fi lter more easily, shut off
the water supply valve.
• Sometimes, it is hard to disassemble the water
fi lter because impurities in the water cause it to
stick. If you are having diffi culties, grip the water
fi lter fi rmly and pull it hard.
• When you pull the water
fi lter, a little water can
leak from the opening.
This is normal. To
minimize the water
leaks, keep the fi lter
cartridge horizontal when you pull it.
• To prevent overfl ow, empty the water fi lter tray
( 3 ) and dry around the fi lter case ( 2 ).
3. Insert the new fi lter into the fi lter case ( 4 ).
4. Push the fi lter, and then turn it clockwise until it
locks.
• If you have trouble inserting the water fi lter
because of high water pressure, shut off the
water supply valve.
(Red)
(Red)
2
1
2
3
2012.5.24 8:44:23 PM
2012.5.24 8:44:23 PM