Ipod; Connecting Ipod - JVC RV-NB100B Instructions

iPod

You can operate iPod through the System.
See p. 39 for compatible iPod devices.
CAUTION
JVC is not responsible for any loss of or damage
0
to iPod that might result from the use of this
System.
Do not connect or disconnect iPod when the
0
System is turned on.
Do not carry the System with iPod connected. It
0
might cause damage to the dock or you might
drop iPod.
You cannot send any data to iPod from the
0
System.
NOTE
iPod is charged through the dock when the
0
System is turned on.
14

Connecting iPod

To connect to the iPod dock
Open the front door
Movable part
Front door
A lightning connector is used for the iPod/iPhone
0
dock of the System. Only iPod nano (7th
generation), iPod touch (5th generation), iPhone
5s, iPhone 5c, and iPhone 5 support the
Lightning connector. iPod/iPhone other than the
above mentioned need to be connected to the
USB connector.
Take the protect case of iPod off before
0
connecting.
Connect iPod firmly.
0
Keep iPod in a straight position while connecting/
0
disconnecting it.
Do not touch or hit the terminal pins of iPod or
0
connector pins in the dock for iPod directly.
Doing so might cause damage to the connector
pins.
To connect to the USB connector
USB cable for iPod
(not supplied)