Rear View - Dyna-Glo DGP321SNP Mode D'emploi

ASSEMBLY INSTRUCTIONS
19. Open the door assembly (M). Place LP gas
cylinder (sold separately) into the nesting hole
located on the cart bottom shelf (J). Rotate
the LP gas cylinder until the hose/regulator
coupling aligns with the threaded valve of the
cylinder. Hand tighten the hose/regulator
coupling to the threaded valve of the LP
gas cylinder.
Tighten the tank screw
rear of the cart until the LP gas cylinder is
secured in place inside the nesting hole of the
cart bottom shelf (J).
clockwise in the
Fully Assembled
Front View
Front View
Front View

Rear View

Rear View
19
LP Gas
Cylinder
17
M
J
Tank
Screw