TEMPERATURE REGULATION
To operate the appliance, touch the temperature
regulator until the LED corresponding to the
required temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is generally the most
suitable.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
•
room temperature
•
frequency of opening the door
•
quantity of food stored
•
appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks. Any time you
touch the temperature regulator, the setting moves
DAILY USE
WARNING! Refer to Safety chapters.
CLEANING THE INTERIOR
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will damage
the finish.
POSITIONING THE DOOR SHELVES
To permit storage of food packages of various
sizes, the door shelves can be placed at different
heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
6
by one position. The corresponding LED blinks for
a while.
2. Touch the temperature regulator until the
required temperature is selected.
QUICKCHILL FUNCTION
You can activate QuickChill function by pressing
the QuickChill button.
The LED corresponding to the QuickChill indicator
lights up.
You can deactivate QuickChill function by pressing
the QuickChill button again.
The QuickChill indicator will light off.
This function stops automatically after
6 hours.
MOVABLE SHELVES
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.