Transportation And Lifting; Manual Handling - Airwell YEVFD Série Manuel D'installation

Transportation and Lifting

Lifting
In front of the unit shipped from unpacking location as close
as possible.
•
Do not place anything on the device.
•
Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
•
In order to ensure safety, maintain the level of lifting,
slowly lifting.
•
Do not lift the elevator to the packing and outer packing
of the equipment.
•
External protection should be used when lifting, such as
cloth or cardboard.

Manual handling

•
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fire or accident.
Pay attention to the following points when handling the equipment manually:
1. No demolition wood base.
2. In order to prevent the dumping of the outdoor machine, the center of gravity of the unit should be noted as shown in
the figure.
3. Two or more people to carry out the outdoor machine.
Handle hole
Wood base
CAUTION
CAUTION
rope
CAUTION
Focus
3
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through
the wood base
around the lifting
hole.
This product maximum tilt
angle 20 degrees.