Urmet 1723/48 Notice D'installation page 5

ENGLISH
DESCRIPTION
The module with ILA (Induction Loop Antenna) Ref. 1723/48 is the hearing aid module for kit 1723 to allow
hearing aid users to hear audio conversation on the door unit through their own aid by connecting the
module to the door unit. The hearing aid must be provided with magnetic "T" interface.
INSTALLATION
1. Undo the closing screw of the device using the screwdriver insert provided.
2. Open the device as shown.
3. Fix the panel to the wall following the installation instructions.
Refer to the booklet provided with the device for information on panel installation.
Position the centring template (A), provided with the ILA module, under the panel and then arrange the
base of the ILA module (1) by the side and mark the fi xing points B of the anchor bolts (2).
The ILA module Ref. 1723/48 must be installed immediately underneath the door unit because
the length of the wire will not allow it to be positioned elsewhere.
4. Drills the holes and fi x the base to the wall with the screws and anchor bolts included with the product.
Make the connections.
5. Close the metal lid of the module.
1
DS1723-035
max 20 cm
Set the switch
to T mode
2
1
2
5