Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PREPARATION
Before beginning assembly of product, make
sure all parts are present. Compare parts with
package contents list and hardware contents list.
If any part is missing or damaged, do not attempt
to assemble the product.
NOTE: Turn Heater Body (A) upside down with top facing down. Make sure to place on a soft surface
or cloth to protect the control panel and top wood finish from scratching and damage.
ASSEMBLY INSTRUCTIONS
1. Guide the power cord through the hole in
the center of the Base(B). Align the base
with the bottom of the heater Body(A). Lower
the Base(B) onto the heater Body(A) while
aligning the pin on the Body(A) with the
oblong slot in the Base(B).
Make sure to also align the three
rectangular holes in the Base(B)
with the three hooks on heater
Body(A).
Oblong Slot
Parts Used
A
Heater
B
Base
Estimated Assembly Time: 10 minutes
Tools Required for Assembly (not included):
Phillips screwdriver
1
B
x 1
x 1
6
1
2
A
Hook
Publicité
Table des Matières
