Yakima HoldUp Mode D'emploi page 5

Masquer les pouces Voir aussi pour HoldUp:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SECuRE THE HOOk.
Compress
the hook
against the
wheel by
applying
firm
pressure.
LOAd SECONd BIkE (IF APPLICABLE).
If necessary adjust tray position to avoid bike to bike interference.
If you have bike to bike
interference when loading
two bikes, adjust trays as
necessary to eliminate
interference between bikes.
• loosen the 4 tray bolts (do
not remove bolts).
• Slide the tray left or right.
• retighten the 4 tray bolts.
• Both trays can be adjusted.
1034426J-5/21
SECuRE REAR
WHEEL STRAP.
Feed the strap through
the spokes of wheel.
Rotate the wheel
slightly, if necessary.
TIGHTEN REAR
WHEEL STRAP.
• Thread strap through
spokes and insert it into
the slot in the wheeltray.
• pull hard to tighten.
• Alternate bike direction.
• refer to steps 10 through 14
to load your second bike.
4X

Publicité

Table des Matières
loading

Table des Matières