Remote Control Panel - Gree GJC9AG-E6RNB3A Mode D'emploi

Remote control panel

Note:
If wireless remote controller is lost, open the control panel and operate manually.
O N / O F F O P E R
1
This button turns the air conditioner ON and OFF.
SWING BUTTON
2
Press this button to activate the supply air flap
to various position or auto swing.
FAN SPEED BUTTON
3
Press the button to select the Low, Middle and Hight Fan Speed.
TEMP/TIMER BUTTON
4
Press the keypad to increase the set (operating)
temprature of the unit and Press the
decrease the set(operating) temperature of the unit.
The temperature seting range is from 16~30
Press the keypad also to increase the selected time
in 1 hour increments, and Press the
decrease the selected time in 1 hour decrements, the
time seting range is from 0~24 hours.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Swing
High
Mid
Low
Fan Speed
Auto
Filter
A I T O N B U T T O N
keypad to
℃ .
keypad to
On / Off
Cool
Dry
Fan
Mode
Timer / Temp
5
SIGNAL RECEIVER
6
MODE BUTTON
Select the operation mode, AUTO, HEAT, COOL, FAN,
DRY (for reverse cycle model) or AUTO,COOL,FAN, DRY
(for cooling only model).
7
FILTER BUTTON
This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation and
cooling. The LED (light) will illuminate after 250 hours
of operation. To reset after cleaning the filter, press the
"Check Filter" button and the light will go off.
2